Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Powering on help!

  1. #1
    Silver Member
    aux9o's Avatar
    Join Date
    March 23rd, 2011
    Posts
    149

    Powering on help!

    I found a old computer of mine it is a hp. I can't get it to turn on I thought that the power button may be bad so I cut the wires going to it and jumped them off still nothing. I took a paper clip and put it in the green wire and a black wire on the power supply and the power supply comes on. Any suggestions on how to get this thing powered up?



    All your base are belong to us!

  2. #2
    Silver Member
    aux9o's Avatar
    Join Date
    March 23rd, 2011
    Posts
    149

    Re: Powering on help!

    I also installed a new mother board to see that would fix it and nothing.



    All your base are belong to us!

  3. #3
    Platinum Member
    John P. Myers's Avatar
    Join Date
    January 13th, 2011
    Location
    Jackson, TN
    Posts
    4,502

    Re: Powering on help!

    Can you short the 2 pins on the motherboard the power switch plugs into with any luck?


  4. #4
    Silver Member
    aux9o's Avatar
    Join Date
    March 23rd, 2011
    Posts
    149

    Re: Powering on help!

    tried shorting them with no luck. I read that the cpu could be bad so I found one on ebay for 5.00 to see it that fix's it.



    All your base are belong to us!

  5. #5
    Silver Member
    aux9o's Avatar
    Join Date
    March 23rd, 2011
    Posts
    149

    Re: Powering on help!

    replaced cpu. Any one have any ideas? It has 2.5 volt going to one of the pins on the MB that the power switch hooks up to. I have tried shorting it out, using another switch. I have tried new ram. The power supply test with I jump it with a paper clip unhooked from the MB. It just won't power on when connected to the MB. Please help!!



    All your base are belong to us!

  6. #6
    Gold Member
    shiva's Avatar
    Join Date
    November 9th, 2010
    Location
    Quinter, Kansas
    Posts
    1,391

    Re: Powering on help!

    I'm no expert on anything but, I have several power supplies that will not power up a mb because the 5v leg is out. Some mb will run without the 5v leg but some will not. a PS tester will let you test all legs of the PS and if the 5v is out then that is probably the problem.
    https://signature.statseb.fr/sig-1240.png[/url]

  7. #7
    Gold Member
    Slicker's Avatar
    Join Date
    October 25th, 2010
    Location
    South of Cheeseland
    Posts
    1,253

    Re: Powering on help!

    Chances are that if it an HP, it probably came with a 250-300W power supply. They usually didn't put in any more than they needed. So, replacing it with a cheap 400W or 500W PSU (~$20-30 on sale) would probably do the trick. If you care to give some specs, chances are people have some parts they could donate to beef it up a little.
    Spring 2008 Race: (1st Place)

  8. #8
    Gold Member
    shiva's Avatar
    Join Date
    November 9th, 2010
    Location
    Quinter, Kansas
    Posts
    1,391

    Re: Powering on help!

    I had a problem with an older box when I added a new card to it. It would power up and run but would shut down in a short time. It took me a while but figured out the PS was getting hot and shutting down. A larger PS fixed it.
    https://signature.statseb.fr/sig-1240.png[/url]

  9. #9
    Silver Member
    aux9o's Avatar
    Join Date
    March 23rd, 2011
    Posts
    149

    Re: Powering on help!

    Im gonna run to best buy and pick a power supply up. Ill keep yall updated.



    All your base are belong to us!

  10. #10
    Silver Member
    aux9o's Avatar
    Join Date
    March 23rd, 2011
    Posts
    149

    Re: Powering on help!

    So now it powers one but then does nothing! This is going to be fun I see..



    All your base are belong to us!

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •