Quote Originally Posted by Sphynx View Post
Glad they are looking at it and hopefully MSI will come up with a remedy that is free to you.

As you all know, I lost a MB to a psu failure recently. When I got the replacement board I put the same H100i cooler on it. It would throttle at idle and over 75c. Prior to that temps had been acceptable. I replaced the cooler with a Hyper 212 evo yesterday and 100% load temps are less than 50c on all cores. I drilled the tanks on the H100i and got all of 1 - 2ozs of fluid out of it. So it does evaporate because there was never any sign of leakage. This is why I prefer air coolers for cpus. GPUs are another story and mine suck enough to where it was never a concern.
Exactly. And the point i was trying to make is the sound the pump makes is nearly the same whether it's pumping liquid or spinning in air. It's only noisy when it tries to pump air and liquid at the same time.

Sent from my SGH-M919 using Tapatalk