Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Dual ATI on Moo - What are your loads?

  1. #1
    Platinum Member
    Maxwell's Avatar
    Join Date
    October 25th, 2010
    Location
    Everett, WA
    Posts
    3,300

    Dual ATI on Moo - What are your loads?

    Title says it all - if you are running Moo on a box with dual ATI cards (a single 5970 would count), what are the loadings you are seeing?

  2. #2
    Silver Member

    Join Date
    March 17th, 2011
    Posts
    197

    Re: Dual ATI on Moo - What are your loads?

    Running two 5870s in CF. Seeing 97% load.

  3. #3
    Platinum Member
    Maxwell's Avatar
    Join Date
    October 25th, 2010
    Location
    Everett, WA
    Posts
    3,300

    Re: Dual ATI on Moo - What are your loads?

    Quote Originally Posted by dan View Post
    Running two 5870s in CF. Seeing 97% load.
    Is that constant and on both cards?

  4. #4
    Administrator
    Bryan's Avatar
    Join Date
    October 27th, 2010
    Location
    CO summer, TX winter
    Posts
    6,457

    Re: Dual ATI on Moo - What are your loads?

    Quote Originally Posted by Maxwell View Post
    Is that constant and on both cards?
    Yep, except if it gets a wu with an odd number of packets then one GPU goes idle right at the end. Supposedly he is now issuing wu with an even number of packets for dual cards.


  5. #5
    Platinum Member
    Maxwell's Avatar
    Join Date
    October 25th, 2010
    Location
    Everett, WA
    Posts
    3,300

    Re: Dual ATI on Moo - What are your loads?

    Huh - I can't get it to keep a constant load on the 5970 without dedicating a core to it.

  6. #6
    Silver Member

    Join Date
    March 17th, 2011
    Posts
    197

    Re: Dual ATI on Moo - What are your loads?

    Quote Originally Posted by Maxwell View Post
    Huh - I can't get it to keep a constant load on the 5970 without dedicating a core to it.
    Same here. I've stopped processing MOO packets right now, as I need all 4 cores.

  7. #7
    Administrator
    Bryan's Avatar
    Join Date
    October 27th, 2010
    Location
    CO summer, TX winter
    Posts
    6,457

    Re: Dual ATI on Moo - What are your loads?

    Quote Originally Posted by Maxwell View Post
    Huh - I can't get it to keep a constant load on the 5970 without dedicating a core to it.
    Ahhhh, then you should have asked the right question at the beginning I have a core dedicated to the GPU ... and I do mean CORE not THREAD! Each machine is running 2 PG wu on Cuda and 1 Moo wu on ATI. The 5970/570 computer uses 26% of the processor without any CPU crunching going on.


  8. #8
    Platinum Member
    Maxwell's Avatar
    Join Date
    October 25th, 2010
    Location
    Everett, WA
    Posts
    3,300

    Re: Dual ATI on Moo - What are your loads?

    Heh... I've the same setup now, Bryan. Moo (5970) has one core on my AMDx6, DRTG (570) has another core. The remaining four are being crunched on.

    This makes sense. Thanks, folks.

  9. #9
    vaio
    Guest

    Re: Dual ATI on Moo - What are your loads?

    Dual 5830's......gave up due to looping/stuck work......had one on 89% for 8 hours.....grrr.

  10. #10
    Administrator
    Bryan's Avatar
    Join Date
    October 27th, 2010
    Location
    CO summer, TX winter
    Posts
    6,457

    Re: Dual ATI on Moo - What are your loads?

    Quote Originally Posted by vaio View Post
    Dual 5830's......gave up due to looping/stuck work......had one on 89% for 8 hours.....grrr.
    Kinda messes with your throughput, don't it! That sucks!


Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •