New GTX 570 Is In. Please post your Settings

[Mike029]

I've got it 901 1802 with mem down to 1300 Temps at 67 running PG. I'm going to run it there for now unless someone told it can go higher.

Thanks guys.

[Bryan]

I've got it 901 1802 with mem down to 1300 Temps at 67 running PG. I'm going to run it there for now unless someone told it can go higher.

Thanks guys.

I run mine at 850/1700/1950. The memory is the stock setting. Unlike the ATI projects, decreasing memory speed WILL decrease you credit output.

[Mike029]

I run mine at 850/1700/1950. The memory is the stock setting. Unlike the ATI projects, decreasing memory speed WILL decrease you credit output.

ACK!! Ok, bumping the mem. back up to where your numbers are.

[Maxwell]

I'm currently rocking mine at 825/1650 (left memory at stock). I would go higher, but it's in a crappy box with crappy ventilation (my "Experimental" box from the "Frankenbox (http://www.setiusa.us/showthread.php?1531-Mary-Shelley-s-Frankenbox&p=16759#post16759)" thread).

When I had it in the Silver Hammer, it was running at 900/1800 (had to bump the voltage to get there), temps at 65C with the fan at 50%. I was going to go higher, but I started moving things.

[Bryan]

Mike I need to clarify the memory setting thing. When I got my 1st 570 I played around and found that moving my stock memory (1950) to 1300 dropped my output by 1 or 2%. Nothing MAJOR!!!

It also dropped the temperature a good amount ... I don't remember the figure but definitely a good bit! That is always a very viable tradeoff when necessary!

[Mike029]

Mike I need to clarify the memory setting thing. When I got my 1st 570 I played around and found that moving my stock memory (1950) to 1300 dropped my output by 1 or 2%. Nothing MAJOR!!!

It also dropped the temperature a good amount ... I don't remember the figure but definitely a good bit! That is always a very viable tradeoff when necessary!

Is it safe to run the 570's into the low to mid 70's? I have no monitor hooked up to the 570. Just running PG and have it up to 900. No wu's have failed yet. (Monitoring the gpu now.) My Temps are at 69 to 72 with memory at 1300. I don't worry about the ATI till it gets into the upper 70's just not sure with this card.

[Al]

I run both of mine at 860 with the memory backed up to 1600, stock voltage. I've had them as high as 900 but wu's fail unless I bump the voltage. I have heat issues so I can't
increase the voltage 24/7. It's easier for me to have it stable and cool. Curious to see how far this card can be pushed.

Right now temps are at 66 and 69. Yesterday's credit for this rig was over 1,000,000. I expect a little more today.

Al

[Mike029]

I run both of mine at 860 with the memory backed up to 1600, stock voltage. I've had them as high as 900 but wu's fail unless I bump the voltage. I have heat issues so I can't
increase the voltage 24/7. It's easier for me to have it stable and cool. Curious to see how far this card can be pushed.

Right now temps are at 66 and 69. Yesterday's credit for this rig was over 1,000,000. I expect a little more today.

Al

Thanks Al. Right now I have the card at 901 1802 1600 mem. Finishing wu's at about 9 mins 15 sec. This is at stock voltage. :)

[Maxwell]

Is it safe to run the 570's into the low to mid 70's? I have no monitor hooked up to the 570. Just running PG and have it up to 900. No wu's have failed yet. (Monitoring the gpu now.) My Temps are at 69 to 72 with memory at 1300. I don't worry about the ATI till it gets into the upper 70's just not sure with this card.
Yeah, I've asked this before. Our esteemed JPM says you're probably good into the low to mid 80s. They are rated up to something like 105C, but I would touch that...

[Al]

Thanks Al. Right now I have the card at 901 1802 1600 mem. Finishing wu's at about 9 mins 15 sec. This is at stock voltage. :)

Ok, I'm jealous. Can't get my above 860 at stock voltage. WU's are finishing in about 9min 37 sec. Guess I'll have to live with it until I get better cooling.

Al

[Maxwell]

Ok, I'm jealous. Can't get my above 860 at stock voltage. WU's are finishing in about 9min 37 sec. Guess I'll have to live with it until I get better cooling.

Al
I'm right in your ballpark, Al. At stock voltage, I was fine at 850, and would lose it at 875. I think Mike is a witch! ;):cool:

[Bryan]

+1
Mine are Evga "SuperClocked" cards and they are good till 860 but fail between 875-890. I've only tried one of the 3 cards ... figured they were all about the same so at stock voltage I run them at 850.

Unlike some people, I'm not greedy so I haven't bumped them up. Just for knowledge purposes, of course, how much did you bump them Max?

[Maxwell]

Just for knowledge purposes, of course, how much did you bump them Max?
Dammit Bryan! Stop making me think and remember things!

IIRC, stock is right around 975 or 979. I bumped to 1000 (I think that's where it settled) and it would run happy and stable just over a 900 core clock. Failed at 925 when I tried that.

[Mike029]

Dammit Bryan! Stop making me think and remember things!

IIRC, stock is right around 975 or 979. I bumped to 1000 (I think that's where it settled) and it would run happy and stable just over a 900 core clock. Failed at 925 when I tried that.

I bought this one.
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130622

I have it running at 901 1802 mem. at 1600. at stock voltage temps 68 to 70.
700k for the first 24hrs it's been running.
I tried to goto 940 but it crashed so backed it down and have left it. I'm real happy with 700k with this card. I may have to get another one in a few months.