ATI 63xxM crunching?

[Maxwell]

I'm too lazy to look this up, so forgive the question.

Aside from Collatz, are there projects that can run on the GPU listed in the Title of this thread? I have a new laptop, but I don't want to stress it for any project on which I have 100M (and Collatz falls under that category).

[Fire$torm]

I'm too lazy to look this up, so forgive the question.

Aside from Collatz, are there projects that can run on the GPU listed in the Title of this thread? I have a new laptop, but I don't want to stress it for any project on which I have 100M (and Collatz falls under that category).

All the GPUs in the 63xxM series are Single Precision FP so any project not requiring DP will run on yours.

Wiki: http://en.wikipedia.org/wiki/Comparison_of_ATI_graphics_processing_units#Radeon _HD_6xxxM_Series

[Maxwell]

All the GPUs in the 63xxM series are Single Precision FP so any project not requiring DP will run on yours.

Wiki: http://en.wikipedia.org/wiki/Comparison_of_ATI_graphics_processing_units#Radeon _HD_6xxxM_Series
So, is there a link to which ones are single precision? I know Collatz is, MW is NOT, but I'm not sure beyond that.

[DrPop]

Try Donate first, and then Moo, and then DiRT - in that order for credits. :D

Sent from my MB860 using Tapatalk 2

[Fire$torm]

So, is there a link to which ones are single precision? I know Collatz is, MW is NOT, but I'm not sure beyond that.

All of them are Single Precision.

AMD website: AMD Radeon™ HD 6300M Series (http://www.amd.com/us/products/notebook/graphics/amd-radeon-6000m/amd-radeon-6300m/Pages/amd-radeon-6300m.aspx#3)

Listed under the Performance Specifications tab
* Engine clock speed: 500-750 MHz
* Processing power (single precision): 80-120 GigaFLOPS
* Polygon throughput: 125-187.5M polygons/sec
* Data fetch rate (32-bit): 16-24 billion fetches/sec
* Texel fill rate (bilinear filtered): 4-6 Gigatexels/sec
* Pixel fill rate: 2-3 Gigapixels/sec
* Anti-aliased pixel fill rate: 8-12 Gigasamples/sec
* Memory clock speed: 800-900 MHz
* Memory data rate: 1.6-1.8 Gbps
* Memory bandwidth: 12.8-14.4 GB/sec

[Beerdrinker]

All of them are Single Precision.

AMD website: AMD Radeon™ HD 6300M Series (http://www.amd.com/us/products/notebook/graphics/amd-radeon-6000m/amd-radeon-6300m/Pages/amd-radeon-6300m.aspx#3)

Listed under the Performance Specifications tab
* Engine clock speed: 500-750 MHz
* Processing power (single precision): 80-120 GigaFLOPS
* Polygon throughput: 125-187.5M polygons/sec
* Data fetch rate (32-bit): 16-24 billion fetches/sec
* Texel fill rate (bilinear filtered): 4-6 Gigatexels/sec
* Pixel fill rate: 2-3 Gigapixels/sec
* Anti-aliased pixel fill rate: 8-12 Gigasamples/sec
* Memory clock speed: 800-900 MHz
* Memory data rate: 1.6-1.8 Gbps
* Memory bandwidth: 12.8-14.4 GB/sec


I believe he meant which projects where single Precision...

[Beerdrinker]

Oh, and BTW...


I believe that ATI 63xx will crunch much like the ATI 5450. Specs are near the same:

http://www.amd.com/US/PRODUCTS/DESKTOP/GRAPHICS/ATI-RADEON-HD-5000/HD-5450-OVERVIEW/Pages/hd-5450-overview.aspx

As for REAL crunching:

I did a crunchtest on Collatz with a ATI 5450 a couple of years ago..:p:p Here´s my thread from back then:

http://boinc.thesonntags.com/collatz/forum_user_posts.php?userid=743

[Fire$torm]

I believe he meant which projects where single Precision...

Ack! OK, as far as I know only MW requires DP. Most of the others are OpenCL which requires 5xxx series or higher.

[Maxwell]

Ack! OK, as far as I know only MW requires DP. Most of the others are OpenCL which requires 5xxx series or higher.
Hehe... Yeah, I was wondering about projects, not the GPU itself. :p

But good to know. I'll try it out on some of those other projects... Thanks!