PDA

View Full Version : Nvidia and ATI in the same box



Mr. Hankey
01-23-11, 03:41 AM
So I did the card swap under the house... I now have an Nvidia GTX 260 (card 0) and and ati 5850 (card 1) in the same box... but boinc does not see the ATI card. Both cards have a dummy connector and the OS sees both cards and the desktop is extended across both cards.

cc_config options look like this:


<options>
<zero_debts>1</zero_debts>
<use_all_gpus>1</use_all_gpus>
<dont_check_file_sizes>1</dont_check_file_sizes>
<report_results_immediately>1</report_results_immediately>
<http_1_0>1</http_1_0>
<max_file_xfers>40</max_file_xfers>
<max_file_xfers_per_project>4</max_file_xfers_per_project>
</options>

and when boinc starts up I see this:


1/23/2011 12:41:34 AM Starting BOINC client version 6.10.58 for windows_x86_64
1/23/2011 12:41:34 AM Config: report completed tasks immediately
1/23/2011 12:41:34 AM Config: use all coprocessors
1/23/2011 12:41:34 AM Config: zero long-term debts on startup
1/23/2011 12:41:34 AM log flags: file_xfer, sched_ops, task
1/23/2011 12:41:34 AM Libraries: libcurl/7.19.7 OpenSSL/0.9.8l zlib/1.2.3
1/23/2011 12:41:34 AM Data directory: C:\ProgramData\BOINC
1/23/2011 12:41:34 AM Running under account Billy
1/23/2011 12:41:34 AM Processor: 8 GenuineIntel Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz [Family 6 Model 30 Stepping 5]
1/23/2011 12:41:34 AM Processor: 256.00 KB cache
1/23/2011 12:41:34 AM Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss htt tm pni ssse3 cx16 sse4_1 sse4_2 syscall nx lm vmx smx tm2 popcnt pbe
1/23/2011 12:41:34 AM OS: Microsoft Windows 7: Ultimate x64 Edition, (06.01.7600.00)
1/23/2011 12:41:34 AM Memory: 4.00 GB physical, 7.99 GB virtual
1/23/2011 12:41:34 AM Disk: 148.95 GB total, 128.13 GB free
1/23/2011 12:41:34 AM Local time is UTC -8 hours
1/23/2011 12:41:34 AM NVIDIA GPU 0: GeForce GTX 260 (driver version 26099, CUDA version 3020, compute capability 1.3, 877MB, 583 GFLOPS peak)


Any ideas? TankMaster you were running an ATI/Nvidia setup correct?

Maxwell
01-23-11, 09:14 AM
If I remember what Tank said when I asked about this, he had the ATI card in slot zero, and did NOT have anything plugged into the Nvidia card. This was under Win7.

Mr. Hankey
01-23-11, 01:51 PM
Well I can try swapping them. The nvidia card used a dummy plug before I added the second card in so that shouldn't make a difference. I am running win 7.

Maxwell
01-23-11, 02:02 PM
Tank said that he could only get tasks to run on the NVidia card without anything plugged into it when he had the mixed cards in the same box.

Fire$torm
01-23-11, 04:12 PM
Up until a few days ago I was running one of my 8800GT's alongside my HD 4850 in my i7 box w/Win7. Never had an issue. I could run any nVidia app that worked with Compute Capability 1.1.

Notes:
OS: Windows 7 Home Premium x64
ATI Driver: 10-12_vista64_win7_64_dd_ccc_enu.exe
nVidia Driver: 260.99_desktop_win7_winvista_64bit_english_whql.ex e
BOINC: boinc_6.10.58_windows_x86_64.exe
OverClocking Utility: MSIAfterburnerSetup200.exe (Works for nVidia & ATI)

I did not extend the desktop.
I did not use a dummy plug on the 8800GT.
I also did not add anything to the cc_config.xml file.
I did not run the cards on the same project. I had the 4850 on MW and the 8800GT on PG.

John P. Myers
01-23-11, 07:41 PM
This is the same problem i had when i first got back on the boards. Computer hadn't been connected to the internet in 3 months, so it had a few dozen updates to do. Before and during the updates, everything worked fine. After the updates, BOINC never saw the ATI card, but the Nvidia card worked fine. I changed the ATI driver all the back to 10.7 and nothing helped. Changed back to an old BOINC version. Nothing. finally i just had to restore the computer from a previously saved point. Then everything was fine. Not one deail about my computer changed, except for whatever updates were downloaded, which included drivers, security updates, etc., so i was never able to pinpoint what the exact problem was :/

John P. Myers
01-23-11, 08:17 PM
Got it. Was the ATI driver. Just tried installing 10.12 APP again and it broke everything. Went back to 10.6 and everything is fine.

Mr. Hankey
01-23-11, 09:02 PM
Swapping slots seem to do the trick... guess the ATI card doesn't like not being in the first slot when an nvidia card is in the box too. Also looks like nvidia cards don't need the dummy plugs or the extended desktop.

Crunching away 8 cpu threads, 1 nvidia and 1 ati....

I am running ATI 10.12 and Nvidia 260.99

Fire$torm
01-23-11, 11:08 PM
Got it. Was the ATI driver. Just tried installing 10.12 APP again and it broke everything. Went back to 10.6 and everything is fine.
Not sure if this is your situation but my 4850 does not like the APP drivers. And though it works with Cat 10.12 w/CCC I cannot crunch 2 wu's consecutively on a card. I may roll back to 10.10.


Swapping slots seem to do the trick... guess the ATI card doesn't like not being in the first slot when an nvidia card is in the box too. Also looks like nvidia cards don't need the dummy plugs or the extended desktop.

Crunching away 8 cpu threads, 1 nvidia and 1 ati....

I am running ATI 10.12 and Nvidia 260.99

Glad to hear things got sorted out. Crunch on!!!

Maxwell
05-22-11, 09:53 AM
Not to be "that guy" who resurrects dead threads, but I find it nice when old threads on the boards are helpful in solving problems. Yay!:cool:

Bryan
05-22-11, 10:48 AM
I just did this with 3 machines and this is what I did/found.

1. If you can get it to work under Vista you are a smarter than I am.
2. Install ATI into slot 0 and get it totally working ... including BOINC.
3. Stick in Cuda card with NO dummy plug/monitor and don't extend desktop.
4. Load the Nvidia driver. I ONLY installed the display driver not complete pkg.
5. I put use_all_gpus>1<use_all_gpus in the cc_config.
6. I'm controlling both cards with MSI Afterburner

Works under W7 with 5970/GTX 570, and 5870/GTX 570

It works with CAT 10.10, 10.12, 11.3, and 11.5. Nvidia 266.58

Mike029
05-25-11, 12:11 PM
I managed to get PG (Cuda), Collatz &MW (ATI) running in one box. Has anyone tryied to run Moo or DNETC with any success?

Bryan
05-25-11, 12:18 PM
I managed to get PG (Cuda), Collatz &MW (ATI) running in one box. Has anyone tryied to run Moo or DNETC with any success?

Yes sir, I'm running Moo and PG on 3 different computers. 2 w/ 5870/570 and 1 w/ 5970/570. Absolutely no problem. On one 5870/570 computer they are clocked at 950/850 (750W PSU). On the 5970/570 they are clocked at 900/850 (1kw PSU).

The 3rd computer has a weak 750W PSU so I can't overclock ... I have a replacement but haven't gotten around to it yet. Running that one at stock 850/797.

Maxwell
05-25-11, 12:49 PM
For some reason, when running Moo, BOINC saw my 5970 as four GPUs, and the 570 as one. Moo ran on it without issue, but it looked weird as hell. Swapped the 570 out for a second 5970, everything works just fine. Weird. Dandasarge had a similar problem...

Bryan
05-25-11, 01:14 PM
Wierd, the 5970 w/ the 570 is seen as 2 on my machine and the stand alone 5970 is also seen as 2. I wonder if it is a driver/BOINC version issue?

Maxwell
05-25-11, 01:30 PM
Wierd, the 5970 w/ the 570 is seen as 2 on my machine and the stand alone 5970 is also seen as 2. I wonder if it is a driver/BOINC version issue?
Could be - it worked though, so I didn't mess with it. The 2x5970 is now humming along nicely...