Log in

View Full Version : RBox 4s for sale


nanoprobe
06-10-15, 06:16 PM
I have 3 RBox 4 miners that I'm looking to sell. Thought I list here first in case anyone is interested. They will do 450+/- GH/s depending on how hard you want to push them. I never ran them higher than 300 MH/z. They should do 320 with a good PSU. Looking for $110 each shipped.

FYI I cut small holes in the top of each housing so I could see the blue flashing lights just to make sure all 4 boards were hashing.

I can post pics if needed
E-30
06-10-15, 10:13 PM
do they work on bu
i have s3 that dont and wold do a switch with you they take 300watts and two 6pin power
nanoprobe
06-11-15, 07:11 AM
do they work on bu
i have s3 that dont and wold do a switch with you they take 300watts and two 6pin power
Yes they work on BU but the only trade I might be looking for would be for a 3770k CPU.
E-30
06-11-15, 08:43 AM
Same one I am looking for
E-30
06-11-15, 08:43 AM
I will ask my wife
E-30
06-11-15, 08:46 AM
All I am looking for is one of them
nanoprobe
06-11-15, 12:55 PM
All I am looking for is one of them

OK! Let me know.
E-30
06-12-15, 11:33 AM
Sorry man can't do it right now
Mumps
06-12-15, 02:09 PM
Question: So this is the RBox R4 (http://www.amazon.com/Rockminer-R4-500-Bitcoin-Miner/dp/B00MIDX8I8), right? You've run them under BitcoinUtopia. Have you had issues with the "blades" going offline every now and then? Requiring a power cycle of the ASIC? I have that happen on my original RBox's, and was wondering if they'd fixed that with this version yet. :)
nanoprobe
06-12-15, 06:56 PM
Question: So this is the RBox R4 (http://www.amazon.com/Rockminer-R4-500-Bitcoin-Miner/dp/B00MIDX8I8), right? You've run them under BitcoinUtopia. Have you had issues with the "blades" going offline every now and then? Requiring a power cycle of the ASIC? I have that happen on my original RBox's, and was wondering if they'd fixed that with this version yet. :)

Yes, they are the RBox 4s pictured in your link. They run spectacularly on BU. Never had a problem with the blades going off line like the R100s do now and then. That's why I cut small holes in the top of the cover. I wanted to be able to see the blue lights flashing with just a quick look. The nice thing about the R 4s is you don't have to run all 4 blades at one time if you don't want to because each blade has its' own power plug. It's like having 4 R100s combined into 1 compact unit.
nanoprobe
06-12-15, 06:57 PM
Sorry man can't do it right now
NP!
nanoprobe
06-13-15, 10:12 PM
2 sales pending. Waiting on payment. SOLD