Mind firing me off a link to the H20 stuff? Thanks! ;)Quote:
Originally Posted by John P. Myers
Printable View
Mind firing me off a link to the H20 stuff? Thanks! ;)Quote:
Originally Posted by John P. Myers
I'm pretty sure JPM uses hardware from Swiftech.
That is correct. For tubing, i use Tygon or just goto Home Depot where it's far cheaper. But do NOT use tubing where the outside diameter is less than 50% more than the inside. For example, if you're using 1/2" ID tubing, the OD should be 3/4". Otherwise the tubing is too weak and won't take the pressure from the pump for very long.Quote:
Originally Posted by Fire$torm
You may (actually probably haven't) have noticed my production dropped off alot the past couple days. Reason is i just rebuild the Maxwell Spanker and have spent the past day bleeding the air from the lines. Still not done. I need a day off where i have time to get something done :/
BUT! When i do finish with that, Maxwell will be sufficiently spanked :D
Naughty there, I can't wait to feel the pain!Quote:
Originally Posted by John P. Myers
http://i252.photobucket.com/albums/h...-0009-Copy.jpg
This is the "before" picture. Isn't she sweet?
http://i252.photobucket.com/albums/h...-0010-Copy.jpg
A closer look. You can see the GTX460 and the 9500GT right under it.
http://i252.photobucket.com/albums/h...-0011-Copy.jpg
Here we are after gutting it. Now to replace the motherboard...
http://i252.photobucket.com/albums/h...-0012-Copy.jpg
And the sexiness has arrived :D
http://i252.photobucket.com/albums/h...-0013-Copy.jpg
Here we put the cooler back on the RAM and waterblock back on the CPU. Now were ready to power up. But man...i sure wish i had enough GPUs to fill all those empty slots...
http://i252.photobucket.com/albums/h...Photo-0014.jpg
Oh my...what have i done!
Those GPUs on the bottom sure are shiney! Wonder what they could be...