Go to the collatz message boards and go to number crunching. Look at the first post something like optimization for solo collatz 4.07. Use it! It cut 1400 seconds off my 7970 times and a couple of hundred off of my 570 and 460 times.
Printable View
Go to the collatz message boards and go to number crunching. Look at the first post something like optimization for solo collatz 4.07. Use it! It cut 1400 seconds off my 7970 times and a couple of hundred off of my 570 and 460 times.
Site down for maintenance :(
Actually, that's a good thing. It means Jon is back and is working on the validator issue. When it's back up, do check out the optimation sticky. It's pretty easy and either works well or doesn't do anything at all...like for my 430s.
http://boinc.thesonntags.com/collatz...ad.php?id=1009Quote:
Originally Posted by Al McAdams
That thread is a mile long. What are the best settings to use for a 7970?
According to Zydor's response to I need some educatin here... ---> http://boinc.thesonntags.com/collatz...9&postid=17082Quote:
Originally Posted by zombie67
His settings are as follows
verbose=1
items_per_kernel=18
kernels_per_reduction=7
threads=8
sleep=1
build_options=-Werror
For Zydor's complete system setup see Message 17007: Solo_Collatz Useage ---> http://boinc.thesonntags.com/collatz...9&postid=17007
Edit: For some reason the links above only work correctly when you are logged into the Collatz forum...
On #2 and #3 I use 22 and 9 respectively. I've also got my 7970s oced to 1125. Wus complete in 570 seconds.
So I had my 2nd 7970 on the bench putting on a new cooler. Just installed it and the optimizations had no positive effect. :confused: With or without the optimization it was only showing about 50% usage. I took out all the optimzation and just installed an app_config.xml using 0.5 cpu and 0.5 gpu (2 wus at a time.) I'm back up to 98 - 99% usage and it completes 2 in 30 minutes or 15 minutes/wu. A figure I can live with.
Both GPUs in the same system?Quote:
Originally Posted by Al McAdams
Edit: Anyone have good results with GTX 460 & 570 cards?
Nope, but they are both AMD cpus.Quote:
Originally Posted by Fire$torm
Single 570 system - Before 1540 seconds ---> After Optimization 1263 seconds @850 1159 seconds @ 900Quote:
Originally Posted by Fire$torm
Dual 570 system - Before 1933 seconds ----> After Optimization 1393 seconds @ 850 (These are averages over the 2 gpus over 40 wus)
Edit:
I can't really give you good times on the 460 because of a heat issue (fubar cooler) I have to decrease volts to 900 and clock to 600 to keep it below 90c, but here goes:
460 @ 600 clock speed, memory 1800 ---> 4622 seconds (way to long)
460@ 625 clock speed, memory @ 1800 and optimized ----> 2818 seconds
Nothing else changed besides the clock speed and even being downclocked it decreased times by 1800 seconds, give it 1500 for the slightly higher clock and it's still worth doing.
N570 is my favorite NVs. How high memory? I remember CC liked the high memory.Quote:
Originally Posted by Al McAdams
Hi Robert! The times I listed were for N570s and all were at the stock clock. The single 570 @ 900 has memory set at 1900. You are correct, Collatz does like fast memory so you might be able to get more out of it by increasing that a bit, but I haven't tried. Let us know if you have luck doing that.Quote:
Originally Posted by Robert7
CC likes fast mem, but I don't like - too hot for multiGPU. This is the reason for my absence in CC. ;)Quote:
Originally Posted by Al McAdams
Has anyone played with the best settings for 580s?
Also, does collatz use DP? Would a TITAN do better with DP set to better DP with the slower clock speed?
These work well on the 570s and would probably work fine on the 580s, but I don't have a 580 so I might just be sucking air on my guess.Quote:
Originally Posted by zombie67
verbose=1
items_per_kernel=20
kernels_per_reduction=9
threads=8
sleep=1
build_options=-Werror
No, Collatz doesn't use DP.
I added my app_cong.xml and exe config settings to the Project App Configs thread - http://www.setiusa.us/showthread.php...1555#post71555
It is based on what I learned (correctly or incorrectly) from this thread and the collatz forums.