We released now also a M Queens app for arm64.
More...
Printable View
We released now also a M Queens app for arm64.
More...
Maybe time to get one of those fancy new Raspberry Pis...
This got me thinking about perhaps building an arm/linux cruncher. But instead of going for the cheapest solution (RP4) which is based on Cortex-A72 (announced in 2015), perhaps there is something more powerful and newer. Are there any boards or computers based on anything more modern than Cortex-A72?
The Snapdragon 845/850 is based on the Cortex-A75 which came out last year. But I find only android devices with it.
Edit: Found one, the Lenovo Yoga C630. Looks like ~$700 new, or ~$500 on eBay. Yikes. That is at least 5 of the 4gb RP4 with all the extras. I guess all that cost is due to things like the display, keyboard, etc. Back to the drawing board.
If your looking for a decent arm machine you need too look at thunder x, just don't mind the prices :D
https://www.asacomputers.com/Cavium-ThunderX.html
On another note I have my 4 overclocked to 1750mhz running solid for 2 days on universe@home compared to my other pi's
3b avg 8 hours
3b+ avg 7.25 hours
4b stock avg 5 hours
4b @ 1750mhz avg 4.25
As far as I can tell, unless you want to spend thousands of dollars on a ThunderX2 server, the only alternative is RP4. Finally a 2gb version showed up as available on Amazon, so I bought it. I kinda think they are lying...
https://turingpi.com/?utm_source=fac...2201390261Ad+6
This is kind of interesting bit still about $400 for. Full build.
Sent from my SM-N960U using Tapatalk
My RP4 arrived. Which linux do you all use for crunching? Raspbian, Ubuntu, or...?
I'm using raspbian, just be aware it's only has 32bit support.
Sent from my SM-N960U using Tapatalk
Well nuts. The 32bit raspbian OS mis-identifies the CPU as ARMv7 instead of ARMv8 which is what the RP4 has. Which means that BOINC tells projects that it has the wrong CPU. And I can't find a 64 bit linux. Ubuntu hasn't released their OS for RP4 yet. No ETA either. I think I just bought an expensive paper weight.
https://archlinuxarm.org/platforms/a...raspberry-pi-4
Sent from my SM-N960U using Tapatalk
I installed Arch. But it also seems to report to BOINC ARMv7.
Although now that I look at your post again, I see you spell it with two "a"s. I assumed it was a typo. I googled Aarch64, but I don't understand the results. Are you talking about a flavor of linux or a package to install or...?Quote:
$ boinccmd --passwd password --get_host_info
timezone: 0
domain name: alarmpi
IP addr: 192.168.2.3
#CPUS: 4
CPU vendor: ARM
CPU model: ARMv7 Processor rev 3 (v7l) [Impl 0x41 Arch 7 Variant 0x0 Part 0xd08 Rev 3]
CPU FP OPS: 1949581324.969092
CPU int OPS: 7564296448.547140
CPU mem BW: 1000000000.000000
OS name: Linux Arch Linux ARM
OS version: Arch Linux ARM [4.19.58-1-ARCH|libc 2.29 (GNU libc)]
mem size: 2042261504.000000
cache size: -1.000000
swap size: 0.000000
disk size: 125217406976.000000
disk free: 116754558976.000000
It was worth a try! At least I got experience with a different kind of linux.
For now, I have it OC to 1.6ghz and running Einstein.
Maybe this would work?
https://fedoraproject.org/wiki/Architectures/ARM
Quote:
Current stable release
The current stable release for ARMv7 can always be found at the ARM Image landing page
The current stable release for aarch64 can always be found at Alternate Architectures landing page
Supported Hardware and Devices
We support a wide variety of hardware and devices from numerous Single Board Computers (SBCs) like the Raspberry Pi 2 and 3 through to Chromebooks and SBSA compliant Servers.
Here is list of device pages based on device category or SoC:
Raspberry Pi ...