Printable View
ok so i got that new fx machine with the 550 ti in it , befire i reinstall win7 on it i have 2 questions
#1 can i run the pci zotac gt430 and the 550ti at the same time
#2 is the 550ti happens to end up right against the 430 , how much room should that 550ti have so the fan can pull in air
going to have this same issue on the other amd box witht he 7990's being right up against each other , but im already looking at some waterblocks for those
#1 is no problem. I've run vastly different NVidia cards together with no problem.
#2 it would be best to have at least a slot in between, but even if not, you'll be OK as long as the fan can turn. You just might not be able to overclock it much, if at all.
thanks its got about 1/8th inch between the the 550ti and the gt430 i also have a 120mm case fan blowing directly onto the cards along with a 80mm mounted directly to the gt430 to keep that thing cool , as it ran super hot in the other machine without a fan on itQuote:
Originally Posted by Maxwell
any specific driver i should use for the 550ti for crunching?
really cant wait to get the new machine up and going , im still waiting on my case and 1300w psu , and need to buy some swifttech water blocks for the 7990's so i can run all 4
Don't over concern yourself with the heat issue until it starts causing a problem, like invalids. I've run my NVs at higher temps than recommended with no problems.
No specific driver. Just use the newest one/what NVidia recommends. I've recently run a 570 and a 295 together with the latest driver.
2 GPUs are no problem, I have this in all my Boxes.
If you try to run three of them consider taking the middle one out of the case with a PCIe expander.
thanks guys got windows 7 installed and box is up and running , now i just gota do all the darn updates
Well, you should be up and running in four days, once all the updates finish. =))Quote:
Originally Posted by dave c
Quote:
Originally Posted by Maxwell
already done
anyways im having an issue with zotac firestorm , its over clocking both the cards the same which isnt good i may just have to leave them stock speeds if i cant figure out how to overclock each individually
i already know the baseline on the gt430 , need to get one on the 550ti to see if overclocking it even really helps much
looks liek i may have to ditch the gt430 temps on the 550ti are sky rocketing at stock speeds
82* so far temps have stabilized at 87*c with fans at 68% is that ok for this card?
Try MSI Afterburner - I've used that before to clock different cards differently...Quote:
Originally Posted by dave c
from what i can find online 88*c is way to hot for this card im going to pull the gt430 , ill stick it in a different machine that has more room
first ill see if removing the gt430 lowers the temps on the 550
Anything less than mid 90s on a nv is fine.
hmm ill let it run as is and keep an eye on it for now , its holding a stable 86/87* with the fan at 60 ish % sure does finish collatz units alot faster then the gt430Quote:
Originally Posted by Sphynx
They give you some wiggle room on the temps. I've been running nvs for years. Unless you start seeing invalids you are fine. The max temp on a 430 is 98c according to the nv website.
i was just surprised cause the gt430 with the 80mm fan i put on it doesnt go over 38*c
thanks guys , i ended up removing the gt430 going to stick that in another machine , and now i have the 550ti overclocked by a good bit running at only 50-52* withe the fan locked to 75%, the card crunches pretty well