what ive been upto while i was gone
Re: what ive been upto while i was gone
Did you get any help from a raccoon?
1 Attachment(s)
Re: what ive been upto while i was gone
Attachment 2351
I'm inspired
HF
Re: what ive been upto while i was gone
Quote:
Originally Posted by
trigggl
Did you get any help from a raccoon?
no but the dog was good at stealing tools lol
Re: what ive been upto while i was gone
some more of the stuff ive been working on
my bitcoin mining farm which takes up so much of my damn time
early picture
http://i76.photobucket.com/albums/j3...psirgv1l5x.jpg
sort of recent
52th
http://i.imgur.com/TPFutzI.jpg
i have 750 amps of 3 phase 480v power which i pull 277v from single legs 95% of the server grade psus that are rated for 220-240v will run on the 277v
for now ill have to settle for my 52th + the 42th worth of gear that is currently being shipped to me
i just need to hit the lottery so i can fill it all with s7's , i have enough power to put about 3 petahash worth of units in there
Re: what ive been upto while i was gone
my other project that has put me in the hospital once aready
1986 honda xl250r
when i got it
http://i76.photobucket.com/albums/j3...pspj0c33ql.jpg
and all painted with a new ex pipe
http://i76.photobucket.com/albums/j3...psrrrcdbdi.jpg
Re: what ive been upto while i was gone
over this winter i decided to mod the bike its getting an rbh31 turbo setup for 15 pounds of boost
first mod is a set of updated forks
cr250 usd forks installed
http://i76.photobucket.com/albums/j3...ps6ym6yrgd.jpg
http://i76.photobucket.com/albums/j3...pshx8ujb4f.jpg
layout of the turbo/plenum, fuel presure regulator and fuel pump
http://i76.photobucket.com/albums/j3...psoy3ftvzw.jpg
http://i76.photobucket.com/albums/j3...psj9vhiddz.jpg
motor is currently apart for a big bore kit , hotcam and a clutch upgrade
http://i76.photobucket.com/albums/j3...psjsrtnuca.jpg
http://i76.photobucket.com/albums/j3...pss9zgvfgy.jpg
it should make around 70/75 hp and wieghs in at around 230 pounds
the street bike wieghs 550+ pounds and has 100 hp
when all is said and done this bike will have a better power to wieght ratio then the ninja 1000
http://i76.photobucket.com/albums/j3...ps6dbc7f92.jpg
Re: what ive been upto while i was gone
Re: what ive been upto while i was gone
Quote:
Originally Posted by
dave c
some more of the stuff ive been working on
my bitcoin mining farm which takes up so much of my damn time
early picture
http://i76.photobucket.com/albums/j3...psirgv1l5x.jpg
sort of recent
52th
http://i.imgur.com/TPFutzI.jpg
i have 750 amps of 3 phase 480v power which i pull 277v from single legs 95% of the server grade psus that are rated for 220-240v will run on the 277v
for now ill have to settle for my 52th + the 42th worth of gear that is currently being shipped to me
i just need to hit the lottery so i can fill it all with s7's , i have enough power to put about 3 petahash worth of units in there
Holy crap. This is clearly not in California.
Re: what ive been upto while i was gone
Quote:
Originally Posted by
zombie67
Holy crap. This is clearly not in California.
no its not , im in utah and my power is some of the cheapest in the country, there is only 2 places with cheaper power then me in the usa and if i can add enough hardware before spring there will only be one place with cheaper power then i have
i just purchased some more evap coolers to get ready to add about 100kwh worth of gear
Re: what ive been upto while i was gone
Re: what ive been upto while i was gone
Quote:
Originally Posted by
Haunted Forest
Got it out!! Good times!
Re: what ive been upto while i was gone
Quote:
Originally Posted by
dave c
no its not , im in utah and my power is some of the cheapest in the country, there is only 2 places with cheaper power then me in the usa and if i can add enough hardware before spring there will only be one place with cheaper power then i have
i just purchased some more evap coolers to get ready to add about 100kwh worth of gear
Damn Dave, you 'aint messing around! Not with the Camaro or the Miners!!
=)
Re: what ive been upto while i was gone
Quote:
Originally Posted by
cineon_lut
Damn Dave, you 'aint messing around! Not with the Camaro or the Miners!!
=)
haha no im not , in the middle of building custom racks/mounting for 42th worth of bfl monarchs , wont get the car out to the track till sometime in late april , but i should be street driving it by the end of the month.its ready to go now but i dont take the car out in the cold or bad weather and we just had 2ft of snow dumped on us
Re: what ive been upto while i was gone
5 out of 61 new miners
http://i.imgur.com/xB1Rz4u.jpg
http://i.imgur.com/d4J9CIJ.jpg
total hashing power at rated speed is 45.75th most of the units i have tested over perform by 25-50gh , so prolly see about 47th out of the lot till i under clock them down to .5w/gh
45th =30kwh for all 61 at full speed 21.06$ per day in power costs mines 62.07$ worth of bitcoin per day = 41.01 profit per day
30.5th =17kwh for all 61 units under clocked $12.24 per day power cost , mines $42.26 worth of bitcoin per day = 30.02 $ per day profit
not a bad lil deal at all
lol am i wrong for wanting to point these all at BU for a few days if my math is right that would be about 45 billion in credits per day
Re: what ive been upto while i was gone
You should point'em there and see...though it would cost you $41/day.
Re: what ive been upto while i was gone
Quote:
Originally Posted by
Sphynx
You should point'em there and see...though it would cost you $41/day.
im not going to point them all as it would be a pain to switch from normal btc mining to the project , im going to set a couple to the side and just leave them on the project
Re: what ive been upto while i was gone
well i got some bad news on my turbocharged dirtbike build today
i found out today that the wristpin is siezed to my rod , cant even press it out , so im buying a stroker crank ( nothing more then a latemodel xr250 crank that has a +3mm stroke )ive got a 76mm wiesco forged piston being delivered for it tommorow
this project is going to be put on slow down for a lil while as i just bought an 05 KX250f
http://i76.photobucket.com/albums/j3...ps14014a7a.jpg
its my buddies bike , ive been trying to get him to sell me the thing for almost 3 years now , hes in the middle of reassembling the engine now as it wiped out the titainum valves , so its getting brand new rings, new moose racing stainless valves ,moose racing hd valve springs ,moose racing ti retianers , so i wont have to do a darn thing to it for a while
time to learn how to ride mx since the kx is a full on motocross bike , im sure ill break a few bones this summer on it , with just a sprocket change the bike will go well over 100mph
Re: what ive been upto while i was gone
forged piston arrived for the bike today
http://i76.photobucket.com/albums/j3...psi7vxiurg.jpg
wiesco 10.5-1 cr 1mm oversized
Re: what ive been upto while i was gone
https://www.youtube.com/watch?v=U9H0MuAXJ5U
got the motor in my car fixed last night and brought my baby home , got a bunch of electrical to do and should be going racing next weekend , i got really lucky that alls i needed to do was replace a couple pushrods and didnt hurt anything else in the valve train
Re: what ive been upto while i was gone
This thread was cleaned this morning and moved to the Team area. Sorry we hijacked your thread Dave...you can have it back now! :rolleyes:
Re: what ive been upto while i was gone
Quote:
Originally Posted by
Sphynx
This thread was cleaned this morning and moved to the Team area. Sorry we hijacked your thread Dave...you can have it back now! :rolleyes:
Link? Or I can't go there because my status is "friend"?
Re: what ive been upto while i was gone
Quote:
Originally Posted by
nanoprobe
Link? Or I can't go there because my status is "friend"?
Nano, you should be able to go there as it was placed in the "Friends of Seti" forum. Here is a link.
Re: what ive been upto while i was gone
Quote:
Originally Posted by
Sphynx
This thread was cleaned this morning and moved to the Team area. Sorry we hijacked your thread Dave...you can have it back now! :rolleyes:
lol its all good
Re: what ive been upto while i was gone
So, what were you really up to while you were gone again? >:)>:)
Re: what ive been upto while i was gone
Quote:
Originally Posted by
Mike029
So, what were you really up to while you were gone again? >:)>:)
lol check this out
http://www.setiusa.us/showthread.php...ed-racing-bike
Re: what ive been upto while i was gone
u guys think purchasing stuff for crunching is exspensive i just bought a couple pails of torco 118 race fuel , 117$ each pail shipped :(
http://i76.photobucket.com/albums/j3...pspqztrhjn.jpg
