Results 1 to 3 of 3

Thread: World's First PCIe 3.0 + USB 3.0 AMD AM3+ Mobo

  1. #1
    Platinum Member
    John P. Myers's Avatar
    Join Date
    January 13th, 2011
    Location
    Jackson, TN
    Posts
    4,502

    World's First PCIe 3.0 + USB 3.0 AMD AM3+ Mobo

    http://news.softpedia.com/news/ASUS-...d-330373.shtml

    Finally someone slapped a booster chip on an AMD mobo so it'll support USB 3.0 and PCIe 3.0, as unnatural as it may be, and is available on the 2nd revision of this board only - to be released mid-march. AMD's 990FX chipset does not support USB or PCIe 3.0 so Asus welded something to their board that does.

    This board has 4 PCIe x16 slots, but only 3 of them are 3.0. The other is only 2.0 and they also threw in a plain PCI slot for a total of 5 slots. Very odd number, but you'll notice unexplained heatsinks clogging up the expansion plane, which are most likely hiding the reason the board supports USB/PCIe 3.0 as well as 3-way SLI/XFire (something made by Lucid is my guess).

    Enjoy


  2. #2
    Past Administrator
    Fire$torm's Avatar
    Join Date
    October 13th, 2010
    Location
    In the Big City
    Posts
    7,938

    Re: World's First PCIe 3.0 + USB 3.0 AMD AM3+ Mobo

    Sweet! Thx JPM.

    Oh, i do have a question in regards to AM3 chips.

    Have they ironed out the issue with LLC (Load Line Calibration) and its effects on Vdroop? Or is this not relevant to the older AM3 CPUs like 1090T?


    Future Maker? Teensy 3.6

  3. #3
    Platinum Member
    John P. Myers's Avatar
    Join Date
    January 13th, 2011
    Location
    Jackson, TN
    Posts
    4,502

    Re: World's First PCIe 3.0 + USB 3.0 AMD AM3+ Mobo

    Quote Originally Posted by Fire$torm View Post
    Sweet! Thx JPM.

    Oh, i do have a question in regards to AM3 chips.

    Have they ironed out the issue with LLC (Load Line Calibration) and its effects on Vdroop? Or is this not relevant to the older AM3 CPUs like 1090T?
    Hasn't been ironed out, really, and it can effect the 1090T as well. Instead of fixing it, more recent BIOSs on more recent boards should have an LLC adjustment in the BIOS. May be something as simple as Enable/Disable. Enable it, of course If you can adjust it in levels, *never* set it to max level. Don't know if they fixed the "LLC working too good" glitch where it ends up adding like 0.150V to your Vcore out of the blue, but better safe than sorry.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •