dual slot gpus / 2 diffent series nvida cards together?

[Maxwell]

anyways im having an issue with zotac firestorm , its over clocking both the cards the same which isnt good i may just have to leave them stock speeds if i cant figure out how to overclock each individually
i already know the baseline on the gt430 , need to get one on the 550ti to see if overclocking it even really helps much

Try MSI Afterburner - I've used that before to clock different cards differently...

[dave c]

from what i can find online 88*c is way to hot for this card im going to pull the gt430 , ill stick it in a different machine that has more room
first ill see if removing the gt430 lowers the temps on the 550

[Al]

Anything less than mid 90s on a nv is fine.

[dave c]

Anything less than mid 90s on a nv is fine.

hmm ill let it run as is and keep an eye on it for now , its holding a stable 86/87* with the fan at 60 ish % sure does finish collatz units alot faster then the gt430

[Al]

They give you some wiggle room on the temps. I've been running nvs for years. Unless you start seeing invalids you are fine. The max temp on a 430 is 98c according to the nv website.

[dave c]

i was just surprised cause the gt430 with the 80mm fan i put on it doesnt go over 38*c

[dave c]

thanks guys , i ended up removing the gt430 going to stick that in another machine , and now i have the 550ti overclocked by a good bit running at only 50-52* withe the fan locked to 75%, the card crunches pretty well