Maxwell Spanker vs. Silver Hammer vs. Annihilatrix, pt. 2

[DrPop]

yeah i use water cooling. it's the only way to go. never have to worry about a fan failing and the pumps (that i use anyway) last 5 years or more. i rest peacefully.

Mind firing me off a link to the H20 stuff? Thanks!

[Fire$torm]

I'm pretty sure JPM uses hardware from Swiftech.

[John P. Myers]

I'm pretty sure JPM uses hardware from Swiftech.

That is correct. For tubing, i use Tygon or just goto Home Depot where it's far cheaper. But do NOT use tubing where the outside diameter is less than 50% more than the inside. For example, if you're using 1/2" ID tubing, the OD should be 3/4". Otherwise the tubing is too weak and won't take the pressure from the pump for very long.

You may (actually probably haven't) have noticed my production dropped off alot the past couple days. Reason is i just rebuild the Maxwell Spanker and have spent the past day bleeding the air from the lines. Still not done. I need a day off where i have time to get something done :/

BUT! When i do finish with that, Maxwell will be sufficiently spanked

[Maxwell]

BUT! When i do finish with that, Maxwell will be sufficiently spanked

Naughty there, I can't wait to feel the pain!

[John P. Myers]

This is the "before" picture. Isn't she sweet?

[John P. Myers]

A closer look. You can see the GTX460 and the 9500GT right under it.

[John P. Myers]

Here we are after gutting it. Now to replace the motherboard...

[John P. Myers]

And the sexiness has arrived

[John P. Myers]

Here we put the cooler back on the RAM and waterblock back on the CPU. Now were ready to power up. But man...i sure wish i had enough GPUs to fill all those empty slots...

[John P. Myers]

Oh my...what have i done!

Those GPUs on the bottom sure are shiney! Wonder what they could be...