With the 6xxx series out this might not be the mod of choice but.........
Arctic Cooling Accelero XTREME 5970 VGA Cooler - $75.95 (Link)
Edit: If you go this route I would suggest using Arctic Silver 5 or Antec Formula 5 thermal compound.
With the 6xxx series out this might not be the mod of choice but.........
Arctic Cooling Accelero XTREME 5970 VGA Cooler - $75.95 (Link)
Edit: If you go this route I would suggest using Arctic Silver 5 or Antec Formula 5 thermal compound.
Last edited by Fire$torm; 12-07-11 at 04:42 PM.
My 5970's don't really run that hot 65c-70c is about it, Winter or cooler weather here now so I can control the Temps in the Garage where I have the Box's by opening or closing the Door a little, I also blow some of the warmer air into the house to try & save on heating costs for the house during the winter ... Will have to see how hot the 6990 run's, if to hot may have to get something like that ...
That is some serious fanning, I think I could feel my hair moving.
I know a guy who bought one of the those fan coolers for his 5970 and he loved it. That is until he added a 2nd high end card to the case and things started getting pretty warm. That cooler doesn't vent out of the back, it dumps all the heat from the 5970 into the case. He went back to stock cooling on the 5970.
Your results may vary
I had 4 GTX 460 Sparkle Calibre's with those types of fans, cooled real good until they either quit running or a fan blade broke off ... ... But they replaced them with 3 GTX 470's & a GTX 480 so I can't complain ...
Don't know what happened but the problem 5970 that had been running the MOO Wu's in the 14-15 Min Range for the last 2+ Days now has gone back to the 18-19 Min Range again. Probably must be something to do with changing the CPU Usage to 3 & then back to 4 again, still ran the Wu's in the 14-15 Min Range running 3 CPU's but now that I've gone back to 4 CPU usage the Wu's are taking 3-4 Min's longer ... :/ ... Will change back to 3 CPU's if the times don't come down soon & see what happens ...
What % GPU utilization is it showing for each GPU in Afterburner? Try with 3 CPU and then with 4 and see if it makes a difference in the loading. If the GPU is still running at the same clock speed, then the difference in completion times should just be a factor of loading percentage. Obviously as cruncher we want the highest % loading possible, which seems to be 99% on the GPUs.
Hard to say really, it's all over the place, up down 1 GPU Core Idle then both running ... It was okay until I changed to 3 CPU Cores running then back to 4 running again ...
Huh. Something is definitely not right. That's what it looks like on Kat's rig with the crossfired 4870s if I don't reserve 2 cores. Try dropping CPU cores in BOINC until the GPU % utilization is pegged at 99% solid on both of them. Then look at your times. If the times go down like they should, then it is not a GPU problem, but something that is bottlenecking the GPUs.