Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: BOINC 7.0.x, important changes in behavior

  1. #1
    Diamond Member
    zombie67's Avatar
    Join Date
    October 24th, 2010
    Location
    Reno, NV
    Posts
    7,381

    BOINC 7.0.x, important changes in behavior

    There are a couple of undocumented changes that everyone should be aware of.

    1) They changed the way "Computer is connected to the Internet about every x days" and "Maintain enough work for an additional" work. While the names of the cells are unchanged, the behavior is now completely different. They now represent a sort of min and max setting. It is apparently way more complicated than that, but min and max are a good shorthand. The impact to us: Many of us use 0 for "Computer is connected to the Internet about every", so that completed tasks are returned as quickly as possible. And that translates to having just enough tasks to cover the cores and GPUs, and no more. Regardless how big you set the "Maintain enough work for an additional", it just won't d/l any more tasks. So I have changed it from 0 and 1, to .5 and 1. Of course, if you are using both 6.12.x or earlier, and 7.0.x on machines, you will need to set two different locations. Otherwise you will be sending mixed signals to the BOINC clients.

    2) Setting a backup project to resource share of 0 is broken and no longer works. With a RS of 0, BOINC will continue to download work, even when there is plenty of work from projects with a RS > 1. It is not clear if this was an intentional change to the code, or an unanticipated consequence of changing something else. Also, it is not clear to me if the developers are aware of the problem.
    "Don't confront me with my failures, I had not forgotten them" - Jackson Browne

    Avatar source


  2. #2
    Past Admin
    Mike029's Avatar
    Join Date
    October 24th, 2010
    Location
    Bronx, New York
    Posts
    3,377

    Re: BOINC 7.0.x, important changes in behavior

    Quote Originally Posted by zombie67 View Post
    There are a couple of undocumented changes that everyone should be aware of.

    1) They changed the way "Computer is connected to the Internet about every x days" and "Maintain enough work for an additional" work. While the names of the cells are unchanged, the behavior is now completely different. They now represent a sort of min and max setting. It is apparently way more complicated than that, but min and max are a good shorthand. The impact to us: Many of us use 0 for "Computer is connected to the Internet about every", so that completed tasks are returned as quickly as possible. And that translates to having just enough tasks to cover the cores and GPUs, and no more. Regardless how big you set the "Maintain enough work for an additional", it just won't d/l any more tasks. So I have changed it from 0 and 1, to .5 and 1. Of course, if you are using both 6.12.x or earlier, and 7.0.x on machines, you will need to set two different locations. Otherwise you will be sending mixed signals to the BOINC clients.

    2) Setting a backup project to resource share of 0 is broken and no longer works. With a RS of 0, BOINC will continue to download work, even when there is plenty of work from projects with a RS > 1. It is not clear if this was an intentional change to the code, or an unanticipated consequence of changing something else. Also, it is not clear to me if the developers are aware of the problem.
    Wow, Keep fixing it till it's broke. Can't wait for Slicker to weigh in on this.



  3. #3
    Past Administrator
    DrPop's Avatar
    Join Date
    October 13th, 2010
    Location
    SoCal, USA
    Posts
    7,637

    Re: BOINC 7.0.x, important changes in behavior

    Thanks for the good info, Z. That is stuff I wouldn't even know about until TOO LATE! Nothing like kicking a good product to the curb until no one wants to use it, huh? Did they implement and "good" or new "useable" features?

  4. #4
    Gold Member
    Slicker's Avatar
    Join Date
    October 25th, 2010
    Location
    South of Cheeseland
    Posts
    1,253

    Re: BOINC 7.0.x, important changes in behavior

    If it isn't broke, fix it anyway. While fixing what works fine, try and make it even more complicated so it will take even less effort to break it in the future. That sure seems to be BOINC SOP.

    There is one additional change. There is OpenCL support in the 7.x.x client. Of course, OpenCL support on the client means nothing if the machine can't get work, runs out of work, or won't ask for work because it now wants to wait to connect to the network even if the preferences are set to the network always being available.
    Spring 2008 Race: (1st Place)

  5. #5
    Past Administrator
    Fire$torm's Avatar
    Join Date
    October 13th, 2010
    Location
    In the Big City
    Posts
    7,938

    Re: BOINC 7.0.x, important changes in behavior

    Quote Originally Posted by Slicker View Post
    If it isn't broke, fix it anyway. While fixing what works fine, try and make it even more complicated so it will take even less effort to break it in the future. That sure seems to be BOINC SOP.

    There is one additional change. There is OpenCL support in the 7.x.x client. Of course, OpenCL support on the client means nothing if the machine can't get work, runs out of work, or won't ask for work because it now wants to wait to connect to the network even if the preferences are set to the network always being available.
    You are right on the money! But there is a simple fix. Rollback to BOINC v6.10.58.

    I think we need to clone Slicker, transform the clone into a Fringe shape shifter and then send it after DA (Body Snatcher Ninja attack!!!!!) Works for me.............................


    Future Maker? Teensy 3.6

  6. #6
    Diamond Member
    zombie67's Avatar
    Join Date
    October 24th, 2010
    Location
    Reno, NV
    Posts
    7,381

    Re: BOINC 7.0.x, important changes in behavior

    Quote Originally Posted by Fire$torm View Post
    You are right on the money! But there is a simple fix. Rollback to BOINC v6.10.58.
    Not possible if you want to run opencl project apps. 7.x is required.
    "Don't confront me with my failures, I had not forgotten them" - Jackson Browne

    Avatar source


  7. #7
    Platinum Member
    Maxwell's Avatar
    Join Date
    October 25th, 2010
    Location
    Everett, WA
    Posts
    3,300

    Re: BOINC 7.0.x, important changes in behavior

    Quote Originally Posted by zombie67 View Post
    Not possible if you want to run opencl project apps. 7.x is required.
    So, when I start going after POEM MMs, I'm going to have to upgrade, aren't I? Damn.

  8. #8
    Past Administrator
    Fire$torm's Avatar
    Join Date
    October 13th, 2010
    Location
    In the Big City
    Posts
    7,938

    Re: BOINC 7.0.x, important changes in behavior

    Quote Originally Posted by zombie67 View Post
    Not possible if you want to run opencl project apps. 7.x is required.
    You are referring to CPU OpenCL correct?


    Future Maker? Teensy 3.6

  9. #9
    Diamond Member
    zombie67's Avatar
    Join Date
    October 24th, 2010
    Location
    Reno, NV
    Posts
    7,381

    Re: BOINC 7.0.x, important changes in behavior

    Quote Originally Posted by Maxwell View Post
    So, when I start going after POEM MMs, I'm going to have to upgrade, aren't I? Damn.
    Yep.
    "Don't confront me with my failures, I had not forgotten them" - Jackson Browne

    Avatar source


  10. #10
    Diamond Member
    zombie67's Avatar
    Join Date
    October 24th, 2010
    Location
    Reno, NV
    Posts
    7,381

    Re: BOINC 7.0.x, important changes in behavior

    Quote Originally Posted by Fire$torm View Post
    You are referring to CPU OpenCL correct?
    eh? No. I'm talking about ati and eventually nvidia GPU apps. All gpu apps will be opencl eventually.
    "Don't confront me with my failures, I had not forgotten them" - Jackson Browne

    Avatar source


Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •